Description :

Heavy metal free glass enamels for toughening and heat strengthening. Borosilicate frit with added metaloxide pigments

All standard colours are intermixable.

Colors :

Colourshades available:

AF3000   White

AF3002   Polar White

AF2100   Lemon Yellow

AF2200   Citrus Yellow

AF2201   Flaming Yellow*

AF3202   Honey Yellow

AF2300   Iron Red

AF2301   Flaming red*

AF2302   Dutch orange*

AF2400   Green

* Cadmium containing colors

AF3401   Turquoise

AF3402   Chrome green

AF3500   Blue

AF3600   Black

AF3601   Jet black

AF5650   Fine black

AF3700   Autumn Brown

AF3730   Rust brown

AF3740   Chocolate brown

AF2900   Etch (zandstraal effect)

AF2905   Transparant

We can mix RAL-matchings for you.

Substrate :

Flat glass, architectural appliance

Conditions :

Spraying

Screenprinting

Roller coaten

Low pressure

High pressure

Oil-based

Water friendly

Mechanically

By hand

Recommended medium:

439-65

747-65

439-65

485-63

439-65

601-63

612-63

654-63

439-65

612-65

654-63

601-63

Recommended thinner:

Demineralized water

Demineralized waterr

RM.323

RM.444

RM.773

RM.444

RM.444

Powder /medium ratio:

10:1

supplemented with demineralized water

4:1

4:1

4,5:1

4,5:1

4,5:1

Viscosity:

15-20 sec Fordcup 4

N.a.

15-20 Pa.s

15-20 Pa.s

120 sec Fordcup 6

N.a.

Temperature when applied:

15-20 ºC

Recommended mesh size:

—

—

61-120T

(150-300 mesh)

61-120T

(150-300 mesh)

—

—

"Wet film" thickness:

100 / 150 gr m2

100 / 200 gr m2

25-35 µ

25-40 µ

20-120 µ

20-120 µ

Drying conditions:

100-150 ºC

Firing conditions :

620 - 720 ºC (1148 - 1328 ºF), toughening cycle

Resistance :

- Acid resistance testresults:

- 3.7 % HCl, 15 minutes at room temperature

assessment according to ASTM C 724-91

grade: 2 to 3

- 10 % Citric acid, 15 minutes at room temperature

assessment according to ASTM C 724-91

grade: 1 to 2

- 4 % Acetic acid, 24 hours at room temperature

assessment  according to ASTM C 724-91

grade: 2 to 3

 - Alkaline resistance testresults :

- 10 % Sodiumhydroxide, 2 hours at 95°C

assesment according to ASTM norm C1203-91

result: < 1.0 mg/cm²

Coefficient of thermal expansion :

Varies between 85 and 95 10-7 K-1 depending on the shades

Surface appearance :

Glossy

Presentation :

the colours from this range can be provided in:

- powder

- I.R. drying screenprinting medium (water- or oilbased)

- waterfriendly rollercoating medium

- waterfriendly curtaincoating medium

- waterbased spraying medium

Minimum purchase quantity per color shade:

Colors in powder form:

Color-paste for screen printing:

1 kg

5 kg

Storage :

It is recommended that the product is stored in dry surroundings at room temperature (20ºC, 68ºF) and is not exposed to large temperature shocks

Stability :

- Powder :

- Paste :

5 years after production date

12 months after production date

(if stored correctly)

Health & Safety :

Good industrial hygiene and work practices should be adhered to when handling these products. For detailed health and safety requirements, please consult the appropriate Material Safety Data Sheet.

Other information :

N.A.

Notice

Please note that when viewed on different monitors these colors will show slight to dramatic color differences unless the given monitor has been calibrated. The information provided herein is correct to the best of our knowledge. No liability for any errors, facts or opinions is accepted. You should satisfy yourself before applying any of the information contained herein to your particular circumstances. No responsibility for any loss as a result of any person placing reliance on any material contained herein can be accepted by Technical Color Service.

Technical Color Service - Hedikhuizerweg 33 - 5222 BC  's-Hertogenbosch - The Netherlands

Tel. +31 (653) 471 811

Reviewed on: 10-12-2019